Heavy metals uptake and its impact on the growth dynamics of the riparian shrub Ricinus communis L. along Egyptian heterogenic habitats

Environmental Science and Pollution Research - Heavy metals are well known for their toxicity and become significant environmental pollution with a continually rising technology and public outcry...     

GIS-based multi-criteria evaluation for olive mill wastewater disposal site selection

Journal of Material Cycles and Waste Management - The installation of an olive mill wastewater (OMW) disposal site without well-defined standards and constraints may cause undesirable long-term...     

Biodegradation of polycyclic aromatic hydrocarbons (PAHs) by fungal enzymes: A review

Polycyclic aromatic hydrocarbons (PAHs) are a large group of chemicals. They represent an important concern due to their widespread distribution in the environment, their resistance to biodegradation, their potential to bioaccumulate and their harmful effects. Several pilot treatments have been implemented to prevent economic consequences and deterioration of soil and water quality. As a promising option, fungal enzymes are regarded as a powerful choice for degradation of PAHs. Phanerochaete chrysosporium, Pleurotus ostreatus and Bjerkandera adusta are most commonly used for the degradation of such compounds due to their production of ligninolytic enzymes such as lignin peroxidase, manganese peroxidase and laccase. The rate of biodegradation depends on many culture conditions, such as temperature, oxygen, accessibility of nutrients and agitated or shallow culture. Moreover, the addition of biosurfactants can strongly modify the enzyme activity. The removal of PAHs is dependent on the ionization potential. The study of the kinetics is not completely comprehended, and it becomes morem hallenging when fungi are applied for bioremediation. Degradation studies in soil are much more complicated than liquid cultures because of the heterogeneity of soil, thus, many factors should be considered when studying soil bioremediation, such as desorption and bioavailability of PAHs. Different degradation pathways can be suggested. The peroxidases are heme-containing enzymes having common catalytic cycles. One molecule of hydrogen peroxide oxidizes the resting enzyme withdrawing two electrons. Subsequently, the peroxidase is reduced back in two steps of one electron oxidation. Laccases are copper-containing oxidases. They reduce molecular oxygen to water and oxidize phenolic compounds.     

Minimization of the formation of disinfection by-products

The drinking water industry is required to minimize DBPs levels while ensuring adequate disinfection. In this study, efficient and appropriate treatment scheme for the reduction of disinfection by-product (DBPs) formation in drinking water containing natural organic matter has been established. This was carried out by the investigation of different treatment schemes consisting of enhanced coagulation, sedimentation, disinfection by using chlorine dioxide/ozone, filtration by sand filter, or granular activated carbon (GAC). Bench scale treatment schemes were applied on actual samples from different selected sites to identify the best conditions for the treatment of water. Samples were collected from effluent of each step in the treatment train in order to analyze pH, UV absorbance at 254 nm (UVA₂₅₄), specific UV absorbance at 254 nm (SUVA₂₅₄), dissolved organic carbon (DOC), haloacetic acids (HAAs) and trihalomethanes (THMs). The obtained results indicated that using pre-ozonation/enhanced coagulation/activated carbon filtration treatment train appears to be the most effective method for reducing DBPs precursors in drinking water treatment.     

Prevalence and predictors of occupational asthma among workers in detergent and cleaning products industry and its impact on quality of life in El Asher Men Ramadan,Egypt

Environmental Science and Pollution Research - Cleaning products are mixtures of many chemical ingredients that are known to contain sensitizers, disinfectants, and fragrances, as well as strong...     

The Impact of Income Inequality on Carbon Emissions in Asian Countries: Non-Parametric Panel Data Analysis

Environmental Modeling & Assessment - Widening income inequality and environmental degradation are two of the most important problems that threat the sustainable development. For that, this...     

Methane oxidation in water-spreading and compost biofilters.

This study evaluated two biofilter designs to mitigate methane emissions from landfill vents. Water-spreading biofilters were designed to use the capillarity of coarse sand overlain by a finer sand to increase the active depth for methane oxidation. Compost biofilters consisted of 238-L barrels containing a 1:1 mixture (by volume) of compost to expanded polystyrene pellets. Two replicates of each type of biofilter were tested at an outdoor facility. Gas inflow consisted of an approximately 1:1 mixture (by volume) of CH4 and CO2. Methane output rates (J(out); g m(-2) day(-1)) were measured using the static chamber technique and the Pedersen et al. (2001) diffusion model. Methane oxidation rate (J(ox); g m(-2) day(-1)) and fraction of methane oxidized (f(ox)) were determined by mass balance. For methane inflow rates (J(in)) between 250 and 500 g m(-2) day(-1), the compost biofilter J(ox), 242 g m(-2) day(-1), was not significantly different (P = 0.0647) than the water-spreading biofilter J(ox), 203 g m(-2) day(-1); and the compost f(ox), 69%, was not significantly different (P = 0.7354) than water-spreading f(ox), 63%. The water-spreading biofilter was shown to generally perform as well as the compost biofilter, and it may be easier to implement at a landfill and require less maintenance.     

Speciation of organotin compounds in sediments of semi-closed areas along the Mediterranean coast of Alexandria

Organotin compounds were measured in sediments of four different semi-closed areas of the Mediterranean coast of Alexandria: the Eastern Harbour, Western Harbour, El-Max Bay, and Abu-Qir Bay. Due to the commercial trade activity inside the Western Harbour, in addition to the effect of wastes discharged from El Noubaria canal, it shows the highest concentrations of total tin (6.34 μg g^-1 dry weight), dibutyl tin (1.63 μg g^-1 wet weight), tributyl tin (0.33 μg g^-1 wet weight) and diphenyl tin (1.06 μg g^-1 wet weight) compared with other locations. The concentrations of TBT species showed the highest contents compared with DBT and DPhT compounds in all sampling areas. This trend might be due to the worldwide use of TBT not only as biocides in antifouling paints but also as preserving agents for wood, fungicides in agricultural activities, and heat and UV stabilizers of PVC, which results in a direct release of TBT into the water body, accumulation in aquatic fauna. There is also precipitation into sediments and a decrease in degradation rate into its derivatives. Variations, types, concentrations, and distribution of different organotin compounds are discussed in the areas under investigation. The study reveals a new record of organotin compounds along the Alexandria coast and makes comparisons with other surrounding areas of interest.     

Reporting central tendencies of chamber measured surface emission and oxidation

Methane emissions, concentrations, and oxidation were measured on eleven MSW landfills in eleven states spanning from California to Pennsylvania during the three year study. The flux measurements were performed using a static chamber technique. Initial concentration samples were collected immediately after placement of the flux chamber. Oxidation of the emitted methane was evaluated using stable isotope techniques. When reporting overall surface emissions and percent oxidation for a landfill cover, central tendencies are typically used to report “averages” of the collected data. The objective of this study was to determine the best way to determine and report central tendencies. Results showed that 89% of the data sets of collected surface flux have lognormal distributions, 83% of the surface concentration data sets are also lognormal. Sixty seven percent (67%) of the isotope measured percent oxidation data sets are normally distributed. The distribution of data for all eleven landfills provides insight of the central tendencies of emissions, concentrations, and percent oxidation. When reporting the “average” measurement for both flux and concentration data collected at the surface of a landfill, statistical analyses provided insight supporting the use of the geometric mean. But the arithmetic mean can accurately represent the percent oxidation, as measured with the stable isotope technique. We examined correlations between surface CH₄ emissions and surface air CH₄ concentrations. Correlation of the concentration and flux values using the geometric mean proved to be a good fit (R² = 0.86), indicating that surface scans are a good way of identifying locations of high emissions.